Description

Licata Epoxy Binder 530 A B

Epoxy Binder 530 A B is a versatile product used for: repairs | surface consolidation of pavement and flooring | primer for coupling subsequent epoxy coatings and polyurethane | binder for epoxy mortars | suitable as a primer for absorbent surfaces | usable as a binder for high resistance mortars | realisation of epoxy screeds | tooled resinous coatings | multilayers in epoxy | suitable for the realisdation of floorings for warehouses, workshops, parking lots, etc., where there is wheel traffic, even heavy.

Suitable for:

• repairs
• surface consolidation of pavement and flooring
• binder for epoxy mortars
• primer for absorbent surfaces
• binder for high resistance mortars
• realisation of epoxy screeds

Key Applications for Two Component Epoxy Floor Binders

Epoxy Binder 530 A+B is a two component epoxy floor binder designed to deliver high performance across a wide range of flooring systems and concrete protection applications. When part B (hardener) is combined with the epoxy resin component, the mix achieves excellent strength and chemical resistance, making it ideal for use in warehouses, workshops, parking areas and floors subject to heavy wheel traffic or light foot traffic.

This versatile product can be used as a bonding promoter or priming coat before applying resin coatings, screeds and mortar systems. It is equally suitable for marking lines on industrial floors, creating multi-layer epoxy installations, and consolidating surfaces on both new concrete and existing substrates. Whether you need to apply a protective coating, prepare aggregate-filled epoxy screeds, or reduce surface dust on worn floors, this component epoxy binder delivers consistent results.

Advantages of Epoxy Resin 530 A+B

Epoxy Binder 530 A+B offers a combination of properties that make it easy to use across multiple flooring and surface protection projects.

Here are the key advantages you can expect:

• Good Penetration and Wetting: The low viscosity epoxy resin ensures good penetration into absorbent and porous substrates, helping to consolidate the surface quickly and effectively.
• Versatile Application Methods: You can apply the product using a roller, squeegee, trowel or rake, depending on the required thickness and the type of installation.
• Wide Temperature Tolerance: The binder can be applied at substrate temperatures from 5°C to 35°C, with an operating range from -25°C to 60°C, ensuring reliable curing even at low temperatures.
• Rapid Hardening and Strength: Once mixed, the product achieves a dust dry state quickly, reducing downtime and allowing floors to return to use sooner.
• Chemical Resistance: The cured epoxy surface offers strong protection against chemicals, oils and everyday wear across industrial and commercial areas.

For full details on consumption rates, packaging options and mix ratios, please refer to the data sheet available on this page.

Technical Specifications

Understanding the technical details helps ensure you get the best performance from every installation.

Key specifications to note include:

• The product has a transparent straw coloured appearance when mixed, with a natural finish suitable for a variety of floor colour schemes.
• Consumption will vary based on surface condition, thickness and whether the binder is used with quartz aggregate or as a standalone scrape coat.
• Packaging is available in pre-measured parts to ensure the correct component ratio is achieved every time you add part B to the resin.
• The product should not be applied when the substrate temperature is within 3°C of the dew point, as condensation can cause blooming on the cured surface.

Always check the data sheet for the latest guidance on equipment, mix procedures and recommended application methods for your specific project.

Surface Preparation & Compatibility

Proper surface preparation is essential before any epoxy binder installation. The concrete substrate must be clean, structurally sound and free from dust, oils or loose material. Mechanical preparation using suitable equipment is recommended to ensure the best possible bond between the resin and the substrate.

Epoxy Binder 530 A+B is compatible with a wide range of surfaces including concrete, cement screeds and wood. When used as a primer or bonding promoter, it provides an effective foundation for subsequent epoxy or polyurethane resin coatings and mortar systems.

To reduce the risk of application issues, always ensure the surface is dry and that environmental conditions are within the recommended temperature range. If you are happy to order or would like to share your project requirements, click our contact page or get in touch with our sales and technical team for further guidance on the right system for your floors.