Glassfibre Mesh

Description

Licata Therm Mesh 160 (certified according to ETAG 004), alkali resistant fibre glass mesh, meets the maximum safety requirements about crack-resistance and resistance to shock.
Internal and External Implementing rules
Mounted the insulation slabs and the glue has dried, you can proceed Shaving and drowning of reinforcing mesh. Continue to shaving with a toothed metal spatula. Starting from the top down, enter and drown the reinforcement mesh greutherm network 150 and 200 in the alkali-resistant glass fiber, superimposing a strip and the other at least 10 cm. In areas subject to shock, you can arm with a double layer of
network.
When the operation is finished the whole thing has to dry for at least 2 days. Then proceed to smoothing GreuRasoPlus the second hand Steel notched trowel not to cover completely the reinforcing mesh
N.B. At the edges, roll out the fiber network glass all over the wall and into the opening (door / window) enticing the reinforcement mortar. With a sharp knife to pass along the and the edge of cutting the reinforcing mesh at an angle of 45 °. The outer corners soffit cut the reinforcing mesh with care and precision.
Download Data Sheet